INC-3 series, screw-mounted stator and screw-mounted rotor zettlex hollow ring encoders
- Detail
- Parameters
INCODER product MANUAL-75MM-300MM inductive angular encoder
Screw-mounted stator and screw-mounted rotor product options INC-3
ZETTLEX IncOders are non-contact devices for precision angle measurements. They use induction technology and work like an electronic transformer. The IncOders can be considered as an inductive encoder. The name is the abbreviation for inductive encoder. IncOders are well suited for harsh environments-these local potentiometers, optics or capacitance devices may be unreliable. The IncOders have two main components, each shaped like a flat ring: a stator and a rotor. The stator is energized and the angle of the passive rotor is measured. Large aperture and low axial thickness can be easily integrated with through shaft, slip ring, direct drive motor, optical fiber, pipe or cable.
Characteristics
No coupling is required, the rotor and stator can be fixed directly to the host product.
Reliable measurement performance is achieved without the need for very high precision mechanical installation and without bearing.
The measurement performance specified in this product guide is guaranteed by simply installing IncOder according to the installation tolerances.
application
Rotatory joints and universal joints
Servo system of steering gear and motor encoder
Photoelectric and infrared camera systems
Heliostats and solar equipment
Manipulator and CNC machine tools
Test and calibrate equipment
Light and heavy calibre weapon systems
Aiming system and range finder
Antennas and telescopes
Packaging and laboratory automation equipment
Medical scanners and surgical equipment
Crane and telescopic boom
parameter
INC-3-75 | INC-3-90 | INC-3-100 | INC-3-125 | INC-3-150 | INC-3-175 | INC-3-200 | INC-3-225 | INC-3-250 | INC-3-300 | ||
Dimensions A - stator/rotor outer diameter | 75.00 | 90.00 | 100.00 | 125.00 | 150.00 | 175.00 | 200.00 | 225.00 | 250.00 | 300.00 | mm |
Dimension B - Pitch circle diameter | 30.50 | 45.50 | 55.50 | 80.50 | 105.50 | 130.50 | 155.50 | 180.50 | 205.50 | 255.50 | mm |
Dimensions C - rotor bore. | 25.00 | 40.00 | 50.00 | 75.00 | 100.00 | 125.00 | 150.00 | 175.00 | 200.00 | 250.00 | mm |
Dimension D - Stator inner diameter. | 25.80 | 40.80 | 50.80 | 75.80 | 100.80 | 125.80 | 150.80 | 175.80 | 200.80 | 250.80 | mm |
Dimension E-T.D.C. offset Angle | 30 | 30 | 30 | 30 | 30 | 30 | 30 | 30 | 20 | 20 | degrees |
N number of clearance screw holes | 4 | 4 | 4 | 4 | 6 | 6 | 6 | 6 | 8 | 8 | |
Maximum radial deviation | 0.25 | mm | |||||||||
Stator and rotor fixers | M2.5 steel head cap screw and M3 steel pin | 9 | |||||||||
Optional voltage range:5-32VDC
Optional signal format:SSI SPI ASI BiSS-C 0-10V Pulse ABZ
The installation
Screw installation IncOders can be installed in a variety of ways. The following sketch shows several examples.
Installation tolerances at the time of installation are within the range of axial clearance and concentricity tolerances provided in the figure below to ensure the accuracy specified in the sample
All forms of IncOder can be installed with a clamp ring on a host device.This method can be applied to the rotor and stator.The clearance of the C-ring should be secured perfectly with at least one screw.
More product details and technical questions, welcome to consult us!
Rp: + 86-029-81104303
Sales manager: Mr. Feng 15029034434 (same as WeChat)
Technical support: 15529638800
Email address: info@lead-control.com
QQ: 976734607
Address: Room 705, Building 2, Vientiane International Center, No. 50 shuangqiao Road, Yanta District, Xi 'an