Inc-6 series servo clamping stator and flat rotor Zettlex hollow ring encoder

IncOder product manuals - 75 - mm - 300 - mm inductive ‍ Angle encoder

Servo clamps the stator and the flat rotor

Product options Inc-6

Zettlex IncOders are non-contact devices for precise Angle measurement.They use induction technology and work like an electronic transformer.IncOders can be considered an inductive encoder.Name the inductive encoder abbreviations.

IncOders are well suited for harsh environments - these are places where potentiometers, optical or capacitor devices may not be reliable.

IncOders have two main components, each shaped like a flat ring: a stator and a rotor.The stator is energized and the angular position of the passive rotor is measured.Large aperture and low axial thickness can be easily integrated with through-shaft, slip ring, direct drive motor, fiber optic, pipe or cable.

The characteristics of

No coupling is required, the rotor and stator can be fixed directly to the host product.

Reliable measurement performance is achieved without the need for very high precision mechanical installation and without bearing.

The measurement performance specified in this product guide is guaranteed by simply installing IncOder according to the installation tolerances.

application

Rotatory joints and universal joints

Servo system of steering gear and motor encoder

Photoelectric and infrared camera systems

Heliostats and solar equipment

Manipulator and CNC machine tools

Test and calibrate equipment

Light and heavy calibre weapon systems

Aiming system and range finder

Antennas and telescopes

Packaging and laboratory automation equipment

Medical scanners and surgical equipment

Crane and telescopic boom

parameter

Optional voltage range: 5-32VDC

Optional signal format: SSI SPI ASI iss -C 0-10V pulse ABZ

The installation

Servo clamped stator and flat rotor form IncOders can be installed in a variety of ways.The following sketch shows several examples.Installation tolerances at the time of installation are within the range of axial clearance and concentricity tolerances provided in the figure below to ensure the accuracy specified in the sample.For IncOder encoders 75, 90, 100 and 125mm sizes, 3 servo clamps can be used;For sizes 150 and 175mm, use at least 4 servo clamps and at least 6 servo clamps for larger sizes.