HS35 series BEI encoder
- Detail
- Parameters
HS35 incremental data table
Series HS35
Position sensors and encoders
HS35 combines the rugged features normally associated with shaft encoders into a hollow shaft style. Its design includes double bearing and shaft seals for NEMA 4, 13 and IP65 environmental classes, a rugged metal housing and a sealed connector or cable seal sleeve.
Characteristics of the
HS35 can accommodate axes up to 1 inch in diameter. It can be mounted on a smaller diameter shaft with the help of an optional insulation plug. It may be mounted on an on-shaft or blind shaft with a closed cover to maintain its environmental grade. HS35 also provides dual output options (inserts) to provide redundant encoder signals, dual resolution, or two separate controllers from a single encoder. Applications include motor feedback and vector control, printing industry, manipulator control, petroleum service industry and web process control.
mechanical
Shaft hole | 1.00”, 0.875”, 0.750”, 0.625”, 0.500”. |
All are equipped with insulation. | |
Allowable dislocation | TIR on matching shaft is 0.005 ", 0.75 "from shaft end. |
Hole to beat | 0.001 highest TIR |
Starting torque at 25°C | All-axis version (SS) = 7in-oz (maximum); Blind axis version (BS) = 4in-oz Max |
Bearing class | High carbon steel at 52100 SAE |
Shaft material | 416 stainless steel |
bearing | Die cast aluminum for surface protection |
cover | Die cast aluminum for surface protection |
Bearing life | 7.5 X 109 RPM (2500 RPM, 50,000 hours) |
The highest speed | 6,000 RPM (see frequency response above) |
Moment of inertia | 0.019 oz-in-sec2 |
The weight of the | 18 oz. Typical |
The electricity
code | To increase the |
The output format | Orthogonal 2 channels, with negative B channel gate 1/2 cycle index |
Revolutions per axis | 1 to 80,000 (see Table A). |
For resolutions above 5000, see the interpolation options in Table A | |
The power supply voltage | The power supply voltage |
The current requirement | 100 mA typical value + output load, 250 mA (maximum) |
Voltage/output | 15V/V: 5 -- 15 VDC input, Vout = Vin |
28V/V: Line drive, 5-28 VDC input, Vout = Vin | |
28V / 5: Line drive, 5-28 VDC in, Vout = 5 VDC | |
28V/OC: open collector, 5-28 VDC input, OCout | |
(See Note 5) | |
Protection level | Reverse, overvoltage and output short circuit protection |
(See note 5) | |
Frequency response | 150 kHz (maximum resolution: 5000 CPT; 300 KHz above 5000 CPT, see also note 7) |
Output terminal pin alignment | See table 1 |
Environmental factors
| Level of the shell | NEMA 4 and 13 (IP65), via shaft seal (unit with MS connector) or cable seal sleeve (unit with cable terminal) |
The temperature | Operating temperature: 0 to 70 C; Extended temperatures up to 105 C can be tested (see note 8); Store, -25 to 90 C, unless extended temperature option is turned on |
shock | 50 grams for 11 milliseconds |
vibration | 5 to 2000 Hz @ 20 g's |
humidity | 98% relative humidity, no condensation |
More product details and technical questions, welcome to consult us!
Rp: + 86-029-81104303
Sales manager: Mr. Feng 15029034434 (same as WeChat)
Technical support: 15529638800
Email: info@leader-control.com frankfeng@lead-control.com
QQ: 976734607
Address: Room 705, Building 2, Vientiane International Center, No. 50 shuangqiao Road, Yanta District, Xi 'an